Tolerances, surfaces, material requirements or performance reserves often have a considerable influence on manufacturing costs.
It becomes problematic when requirements are carried over for years without regularly checking which function they still safeguard today.
The key question is therefore not:
“How can we reduce the specification?”
But rather:
“Which requirement is necessary for the function to be performed reliably?”
Why tight tolerances can drive costs
The tighter a permissible deviation becomes, the more – depending on the process – the requirements for:
- production,
- machine capability,
- measuring equipment,
- inspection,
- scrap,
- rework,
- process stability
can increase.
This does not mean that tight tolerances are wrong in principle.
They must be used where they are functionally necessary.
Requirements that have grown over time
Specifications often arise from:
- earlier problems,
- safety margins,
- existing manufacturing processes,
- customer specifications,
- standards,
- the experience of individual engineers.
Over time, it can become unclear why a value was originally specified.
Value Analysis can help to restore the link to the function.
Functions as the benchmark
Instead of questioning the drawing in isolation, the following is examined:
- Which function depends on the specification?
- Which minimum requirement is needed to perform the function?
- what interactions exist with other functions?
- what risks arise from a change?
- what tests or trials would be necessary?
This makes the discussion technically more robust.
Separating customer requirements from internal requirements
Not every internal specification is directly a customer requirement.
A customer may require, for example:
- a service life,
- a noise limit,
- a level of precision,
- a level of reliability.
How these requirements are implemented technically is often the task of the development department.
This can make alternative technical solutions possible without reducing customer value.
Considering tolerance chains and the overall system
Individual tolerances can influence one another within the system.
Optimisation should therefore not take place only locally.
Through a change to one component,
- assembly,
- function,
- tightness,
- service life,
- noise,
- safety
can be affected.
Value Analysis provides the framework, but detailed technical analyses must be carried out by the relevant specialist disciplines.
Typical lines of enquiry
Depending on the product, the following can be investigated:
- widening tolerances
- alternative datum and measurement concepts
- self-centring design
- function integration
- a different manufacturing process
- standard parts
- modified surface requirements
- alternative materials
- a more robust architecture
